Open calls · Research grant · Materials Science
Technologies for innovative processing of raw materials (IA)
European Commission · Horizon Europe · HORIZON-CL4-2027-01-MAT-PROD-16
Deadlines
- 2 Feb 2027 Deadline in 83 days
Time of day: 17:00 Brussels time.
Who can apply
- Countries
- Applicants from any country can take part. Funding is usually limited to the EU, associated countries and listed low- and middle-income countries; sanctions apply to some.
- Who applies
- A consortium of organisations
Money
- Per project
- €10M–€12.5M per project
- Total budget
- €49M
- Expected awards
- 4
About the call
Expected Outcome:
• Increased recovery rates of valuable raw materials, particularly critical raw materials from low grade or complex ores and/or from mining waste;
• Increased economic performance in terms of higher material-, water-, energy- and cost-efficiency and flexibility in minerals processing and metallurgical processes; and
• Improved health, safety and environmental performance of the operations throughout the whole life cycle that is considered, including a reduction in waste, wastewater and generation of emissions of air pollutants and a better recovery of resources from generated waste, reducing the environmental footprint and contributing to biodiversity and ecosystems preservation.
Scope:
Actions should develop and validate / demonstrate pilot scale facility located in the EU integrating relevant processing and refining technologies for improved recovery of raw materials from low grade and/or complex ores from extractive wastes, reduction of waste and water and air pollution, higher energy efficiency and reduction of land and sea-use change, habitat loss, degradation and fragmentation. The action can also focus on reducing the content of toxic elements or compounds in the resulting material products. The actions should target minerals and metals, particularly critical raw materials.
The solution proposed should be flexible enough to adapt to different or variable ore grades and extractive waste streams and should be supported by efficient and robust process control. Where relevant, any solution proposed for the reduction of the content of toxic elements or compounds in the resulting materials should also include the appropriate management of the hazardous substances removed.
Actions should develop intelligent and innovative production systems which better utilise natural resources by minimising losses during waste-rock separation in an optimised and energy-efficient process and by minimising use of water.
Recycling of end-of-life products is excluded from this topic.
Actions should envisage clustering activities with other relevant selected projects for cross-projects co-operation, consultations and joint activities on cross-cutting issues and share of results as well as participating in joint meetings and communication events. To this end proposals should foresee a dedicated work package and/or task, and earmark the appropriate resources accordingly.
Actions should facilitate the market uptake of solutions developed through industrially- and user-driven multidisciplinary consortia covering the relevant value chain and should consider standardisation aspects when relevant. The action should also include the analysis of financial opportunities ensuring the market exploitation and replication of the circular business model behind the developed solutions as new processes, products and/or services. The industry based in the EU, and users of recovered secondary raw materials should assume prominent role in the proposed actions, supported by adequate allocation of resources.
Proposals submitted under this topic should include a business case and exploitation strategy, as outlined in the introduction to this Destination. For TRLs 6-7, a credible strategy to achieve full-scale deployment in the EU is expected, indicating the commitments of the leading partners after the end of the project.
International cooperation is encouraged with countries with which the EU has signed Strategic Partnerships on raw materials, especially with Ukraine. [1]
Technology Readiness Level - Technology readiness level expected from completed projects
Activities are expected to start at TRL 5 and achieve TRL 7 by the end of the project – see General Annex B.
[1] https://single-market-economy.ec.europa.eu/sectors/raw-materials/areas-specific-interest/raw-materials-diplomacy_en
Text from the funder (European Commission, CC BY 4.0).
Conditions in full
"> General conditions
1. Admissibility Conditions: Proposal page limit and layout
In order to include a business case and exploitation strategy, as outlined in the introduction to this Destination, the page limit is exceptionally extended by 3 pages.
Admissibility conditions are described in Annex A and Annex E of the Horizon Europe Work Programme General Annexes.
Proposal page limits and layout: described in Part B of the Application Form available in the Submission System.
2. Eligible Countries
described in Annex B of the Work Programme General Annexes.
A number of non-EU/non-Associated Countries that are not automatically eligible for funding have made specific provisions for making funding available for their participants in Horizon Europe projects. See the information in the Horizon Europe Programme Guide .
3. Other Eligible Conditions
To increase EU resilience in raw materials supply chains and thus reduce the serious risk to the Union's strategic assets, economic and societal interests, autonomy and security associated with the current EU reliance on a few third countries for critical raw materials, by increasing sustainable and responsible sourcing of primary and secondary raw materials necessary to enable the green and digital transition and in alignment with the objectives of the Critical Raw Materials Act[[Regulation (EU) 2024/1252 of the European Parliament and of the Council of 11 April 2024 establishing a framework for ensuring a secure and sustainable supply of critical raw materials and amending Regulations (EU) No 168/2013, (EU) 2018/858, (EU) 2018/1724 and (EU) 2019/1020
]], participation in this topic is limited to legal entities established in Member States, associated countries, OECD countries, African Union Member States, MERCOSUR, CARIFORUM, Andean Community and countries with which the EU has concluded strategic partnerships on raw materials[[ https://single-market-economy.ec.europa.eu/sectors/raw-materials/areas-specific-interest/raw-materials-diplomacy_en
]] as well as trade agreements (or association/economic partnership or equivalent agreements, including the new Clean Trade and Investment Partnerships) containing raw materials cooperation provisions (i.e. Energy and Raw materials chapters)[[https://policy.trade.ec.europa.eu/eu-trade-relationships-country-and-region/negotiations-and-agreements_en]]. The choice of these countries was made taking into consideration the development of strategic international partnerships on raw materials and avoidance of reinforcing existing over-dependencies, as well as the importance of involving partners committed to pursuing open trade in such materials.
Proposals including legal entities which are not established in the countries that fall under the criteria above will be ineligible.
For the duly justified and exceptional reasons listed above, in order to guarantee the protection of the strategic interests of the Union and its Member States, entities established in an eligible country listed above, but which are directly or indirectly controlled by a non-eligible country or a non-eligible country entity, shall not participate in the action.
described in Annex B of the Work Programme General Annexes.
4. Financial and operational capacity and exclusion
described in Annex C of the Work Programme General Annexes.
5a. Evaluation and award: Award criteria, scoring and thresholds
are described in Annex D of the Work Programme General Annexes.
5b. Evaluation and award: Submission and evaluation processes
are described in Annex F of the Work Programme General Annexes and the Online Manual .
5c. Evaluation and award: Indicative timeline for evaluation and grant agreement
described in Annex F of the Work Programme General Annexes.
6. Legal and financial set-up of the grants
The granting authority may, up to 4 years after the end of the action, object to a transfer of ownership or to the exclusive licensing of results, as set out in the specific provision of Annex…
We sort calls into fields, career stages and countries automatically. Always check the conditions on the funder’s page before you apply.
Discussion
Applying too? Looking for partners? Ask here.